The term loaded means the maximum gross weight rating of the container.Tank Containers. Specification A cylindrical pressure vessel, surrounded by a 20 x 8 x 8.5 framework (the overall international standard dimensions of a container) for the transport of hazardous and non-hazardous liquids in bulk. Standard ISO Tank Container SpecificationsShipping containers and storage containers can come in a range of sizes, 20ft and 40ft shipping containers are the most common container lengths (externally) and 8ft in width as standard.

Our variety of small new build containers are ideal for small areas and tight corners and a solution if you are restricted of space. Internal dimensions45ft High Cube Dry Container: 86.168 m3: 4,590: 32,500: 27,910: 48ft High Cube Dry Container: 97.806 m3: 5,140: 30,480: 25,340: 53ft High Cube Dry Container: 109.218 m3: 4,710: 30,480: 25,770: 20ft Refrigerated Container: 29.900 m3: 2,960: 24,000: 21,040: 40ft Refrigerated Container: 60.000 m3: 4,240: 34,480: 26,240: 40ft High Cube Refrigerated Container: 67.800 One-Way Move (Cabotage), enables customers to lease a container which can be picked up at one location and returned to another location, subject to Seaco's terms and conditions. 3PFM Seaco has years of experience in managing third party container fleets under an asset management agreement.The sides of a container in nearly all cases, is corrugated. Container Lift Spreaders Container Lift Slings ISO Container Lifting. For the purpose of container handling and securing, a 'loaded container' is a container other than in the tare (empty) condition.

500 mm (19.7 in) diameter. Columbus TCG 316L Hot Rolled, Polished (heads) 2B finish. Columbus TCG 316L Cold Rolled 2B (shell) 2B finish. EN 10210 S355 J2H / Supraform TM 380 (plates) EN 10210 S355 J2H / Supraform TM 380 (hollow sections)

Fitted with three closures. One 1 1⁄2” stainless steel 316 ball valve is fitted with 1 1⁄2” BSP male-threaded nipple and cap. There is also a provision for rupture disc and manometer.

The center spillbox protects the relief valve and manhole. Two spillboxes are fitted. Provision is made for the fitting of a 3” butterfly valve and a 3” siphon tube. External valve: clamped 3” butterfly valve with a 3” BSP male-threaded outlet and 3” BSP stainless steel cap.

One 80 mm thermometer is fitted with dual scale (’20☌ to 200☌ and 0☏ to 400☏) One stainless steel lug is located at the rear, bottom frame. One ladder is provided at the rear, curb side of the frame. Fitted with one longitudinal and three lateral sections of marine grade aluminum walkways providing access to all fittings. 50 mm of Rockwool on the shell and 50 mm of Glasswool on the ends of the barrel Fitted with 8 square meters of steam heating area comprised of 8 runs of 110 mm (4.3 in) x 4,700mm (180 in) longitudinal channels fitted with 3/4″ BSP male-threaded inlet and outlet connections.

These specifications should only be used for general informational purposes. IMDG-IMO, US DOT – CFR49, RID/ADR, AAR 600, CSC, TC, TIR / Customs, UIC.Please note that the above specifications are “general specifications” that pertain to the majority of the tank containers in our fleet. 100% of ISO tank calibrated. Fitted with a stainless steel calibration chart.

20 Foot Iso Container Specification